Floor Systems

Adhesive for floor and wall tiles QUARTZ KLASIK (06.75)

Adhesive for floor and wall tiles QUARTZ KLASIK

A thin-layered cement-based adhesive mortar intended for bonding ceramic wall and floor tiles from natural stone, for laying fine-grained stoneware in plaster, concrete, porous concrete and unplastered walls designed only for interiors (indoor spaces and unheated areas), with no combined load of water and frost. Intended only for spaces burdened by the movement of people, and for thin-film bonding where the thickness of the adhesive bed does not exceed 5 mm. Also used for bonding tile to liquid waterproofing coatings such as Liquid paperboard S-T8 and other waterproof materials. The adhesive can be used for bonding with aerated concrete blocks HEBEL / YTONG.


  • Frost resistant
  • For use in interiors
  • High adhesion
  • Complies with European standard EN 12004:2001 for type C1

Technical data:

Base / Material cement mix with binders
Thermal resistance –20 / +70°C
Application temperature +5 / +25°C
Processing time ≈ 2 hours (after mixing)
Open time ≈ 20 minutes (after application)
Tensile bonding strength (normative) ≥ 0,5 MPa
Grouting wall and floor tiles after 24 hours, after 48 hours
Full load after 7 days
Approximate consumption 2,3 to 5,0 kg/m2 (of dry putty, depending on the type of substrate and size of the grout 3 - 8 mm)
Note: Consumption depends on the prepared state of the substrate


Technical documentation

Packaging, Price

order no. packaging contents quantity per pallet color EAN
57101DISTYK sack 25 kg 42 pcs gray 8595100120106