Adhesives for tiles and paving

Adhesive for floor and wall tiles QUARTZ C1T (06.78)

Adhesive for floor and wall tiles QUARTZ C1T

A thin-layered cement-based adhesive mortar intended for bonding ceramic wall and floor tiles from natural and artificial stone, plates of varying thicknesses such as lotto, for laying fine-grained stoneware in plaster, concrete, porous concrete and unplastered walls. Also used for bonding tiles for liquid waterproofing coatings such as Liquid paperboard S-T8 and other waterproof materials, old tiles, etc. Ideal for bonding heat-insulating material from polystyrene or mineral wool panels on masonry facades.


  • Resistant to water and frost
  • For indoor and outdoor use
  • Elastic, with high adhesion
  • With reduced slip
  • Complies with European standard EN 12004:2001 for type C1T

Technical data:

Base / Material cement mix with binders
Thermal resistance –30 / +70°C
Application temperature +5 / +25°C
Processing time » 2 – 3 hours (after mixing)
Open time ≈ 20 minutes (after application)
Correction possibility ≈ 5 – 15 minutes (depending on the ambient temperature)
Tensile bonding strength (normative) ≥ 0,5 MPa
Slip ≤ 0,5 mm
Approximate consumption 1.6 – 2.4 kg/m2 (mosaic and tiles)
2.4 – 3.4 kg/m2 (tiles)
3.6 – 4.5 kg/m2 (coarse ceramics)
Note: Consumption depends on the prepared state of the substrate


Technical documentation

Packaging, Price

order no. packaging contents quantity per pallet color EAN
57103DISTYK sack 25 kg 42 pcs gray 8595100106599