Adhesives for tiles and paving

FX adhesive for floor and wall tiles QUARTZ (06.77)

FX adhesive for floor and wall tiles QUARTZ

A thin-layered cement-based adhesive mortar intended for bonding ceramic wall and floor tiles from natural and artificial stone, plates of varying thicknesses such as lotto, for laying fine-grained stoneware and panels in plaster, concrete, porous concrete and unplastered walls. Also used for bonding tiles for floor heating, for liquid waterproofing coatings such as Liquid paperboard S-T8 and other waterproof materials, old tiles, etc. Ideal for bonding heat-insulating material from polystyrene or mineral wool panels on masonry facades and the subsequent bonding (rendering) of reinforcing fabric.



  • Resistant to water and frost
  • For indoor and outdoor use
  • Highly flexible, with high adhesion
  • With reduced slip
  • Prolonged setting period
  • High tensile strength and pressure
  • Complies with European standard EN 12004:2001 for type C2TE


Technical data:

Base / Material cement mix with binders
Processing time 3 – 6 hours (after mixing)
Open time ≈ 30 minutes (after application)
Correction possibility ≈ 5 – 15 minutes (depending on the ambient temperature)
Tensile bonding strength (normative) ≥ 1,0 MPa
Slip ≤ 0,5 mm
Approximate consumption 1.6 – 2.4 kg/m2 (mosaic and tiles)
2.4 – 3.4 kg/m2 (tiles)
3.6 – 4.5 kg/m2 (coarse ceramics)


Technical documentation

Packaging, Price

order no. packaging contents quantity per pallet color EAN
57104RL sack 5 kg 108 pcs gray 8595100111432
57103Q sack 25 kg 42 pcs gray 8595100101952